Abrasive wire wheel brushes advantage of high strength, stiffness, fatigue resistance, chemical resistance, high melting point. 1, brush wire not falling in the working process. 2, brush wire brush should be fixed within the base of high strength stainless steel to prevent corrosion. 3, with wavy bent wire brush. 4, abrasive sand inside wire brush should not by bending wire brush and off. 5, reasonable height and density wire brush. 6, wire brush in a humid environment should have high hardness and toughness. 7. A wire brush should have good bend recovery. 8. A wire brush should have good wear resistance. The so-called abrasive wire means added silicon carbide (SIC) or aluminum oxide (AO) and other abrasive nylon wire brush as a new material, most of the current applied to the manufacturing of polishing brush, polishing brush. But precisely because it is a new kind of brush material, brush a lot of awareness of their business is not deep enough, sometimes in order to compensate for the lack of a functional abrasive wire brush, and make a single change for granted, apparently it seems to solve question, in fact, has brought more new problems. Pole flat brush Usage: suitable for metal and non-metal surface treatment used more for product workpiece deburring. Applies: Tool passivation removal, peeling paint, rust, decontamination, polishing, deburring; machined parts face, mold, shaft hole, cylinder components, steering gear and the gear housing, the pump housing, the control piston and other surface cleaning, deburring. In the car, hydraulic and foundry industry is widely used for lathe, drill press, installed in portable electric tools or machining centers and robots. Haibu Lusi Dun Industrial Co., Ltd. Tel: 021-60259232